When you use the TOAD scanning tool to clear the code, the light will turn off. As long as there’s a fault in the transmission, a code will be registered and the Automatic Transmission/Automatic Gearbox Warning Light will come on. Similarly, a transmission scan displays and erases transmission codes.

By doing so, TOAD OBD2 software makes it possible to turn off the malfunction indicator light (MIL) also called the check engine light ( CEL). Now, an engine scan pulls and clears trouble codes that are related to the engine. The TOAD diagnostic tool displays codes from two main systems – the engine and transmission. For example, if the RPM is below or above the normal operating range, you will get an audio notification. You can view up to 90 PIDs! And if a parameter registers an abnormal value, the software will notify you using an audible warning. Either way, the TOAD diagnostic software gives you enough time to come up with an accurate analysis of the live data.īetter yet, there’s an option to view live data streams as PID graphs. Alternatively, you can save it and do the analysis at a later time. You can record that data and play it back for further analysis. So the data you get is, in fact, real-time and live. If you’re working on a newer model, then expect a whopping 6-16Hz. If the car is old, you can still get a rate of 4-6Hz. The best part about this OBD2 software is that it has a fast refresh rate. They essentially indicate whether the car is performing as it should. These values are very important because they show sensors, relay and switch inputs in real-time when the engine is running. You can view live values for RPM, engine temp, speedometer, fuel consumption, voltage, LAC, O2 and so much more. Like any other reliable OBD2 programming software, TOAD monitors real-time data from the ECU, emission system and transmission.

So if the problem is in any other system, say ABS or SRS, you won’t know. The only problem is that the software only pulls codes from the engine and transmission systems. That goes for generic as well as manufacturer-specific trouble codes. There’s a comprehensive DTC code analyzer that features a built-in database with over 15,000 code definitions.Įven if you don’t know what a code implies you will know once it’s displayed because it will come with a description. Once your car is hooked up to TOAD, the software will pull all the available fault codes.

That includes the part number, manufacturer and hardware/software version. It will detect your vehicle automatically as well and display the VIN, VCN and ECU information. The software will detect your ELM327 scanner automatically when you connect it. Simply download the software, install on your PC or tablet and you’ll be good to go. TOAD Pro is pretty straightforward and easy to use.

Download toad diagnostic software